How exactly to Hook Up a Water Line up to a fridge Through the Sink
Related Articles
A fridge by having a automated ice maker and an integrated water dispenser does nothing at all if you fail to have water line for connecting to it. Numerous domiciles have fridge water supply line set up during initial construction, but this particular feature wasn’t contained in the building that is original of some domiciles. You can easily re solve this having an ice manufacturer installation kit enabling you to definitely utilize the plumbing work under the sink. The kit gives you the desired components to hook a water line up to your refrigerator.
Find your water supply lines beneath your sink. You have three water supply lines underneath the sink; two lines link right to the tap even though the line that is third to the dishwasher. The valve linked to the right region of the tap may be the water supply line that is cold. Turn the water that is cold the supply line clockwise to shut it.
Connect a drill that is 5/16-inch to your drill. Drill holes into the base case walls to route water line from under the sink into the back for the ice box. Drill as near to your back wall surface associated with the case as you are able to, and that means you do not lose space for storage within the case.
Thread the water line, within the ice manufacturer installation kit, through the certain area behind the fridge to under the sink. Keep the water that is excess behind the ice box.
Start the cool water faucet to strain any water left when you look at the supply line. Utilize pliers to untwist the faucet supply line through the water supply valve that is cold.
Wrap threads regarding the water that is cold with 2 or 3 wraps of thread-seal tape. Twist the male end of the adapter that is quick-tee the valve. Wrap the female thread on the exact opposite end for the adapter with thread-seal tape. Twist the supply that is faucet on the feminine end for the adapter.
Slide the compression nut that was included with the kit within the newly installed supply line. Ensure that the threads are facing the final end for the line. Thread the ferrule through the kit on the brand new line.
Wrap the rest of the male threads from the adapter that is quick-tee thread-seal tape. Insert the brand new water line to the opening in the tee. Slip the compression nut within the male threads and tighten it regarding the adapter.
Fasten all three pea nuts from the quick-tee adapter with pliers or a wrench that is adjustable. Don’t twist the pea pea nuts too tight as this may damage the supply valve, the supply line additionally the adapter.
Put the end associated with the water line you wish to connect to the fridge as a bucket that is 5-gallon browse around here. Turn the water that is cold valve on under the sink. Allow one or two gallons of water explain to you the line that is new take away the air. Turn from the supply line.
Slip the rest of the compression nut and ferrule within the ice box end associated with water line that is new. Link the line into the water line connector regarding the straight back for the fridge.
Turn the supply line on once more. Watch out for leaks at all the connections. Tighten the connections slightly if you notice a drip. If tightening the bond will not stop the leak, turn the water off, take away the connector and include additional thread-seal tape before reconnecting water line.
Plug your refrigerator to the wall surface. Coil the extra water line behind the fridge. Drive the fridge from the wall surface.